change network address on wireless network mac address

A MAC address consists of six groups of numbers or letters arranged as such, D4-FB-6A-7C-31-B4 (just an example.) Once the MAC address has been changed, it will remain as your router’s primary MAC address until you revert the router back to its default factory settings. It should be clearly marked.Ĭhange the MAC address to anything that suits your fancy, so long as it follows the proper format. Navigate to the wide-area network (WAN) settings page or a similar settings page (each router may be different.) Once there, look for an option to change the MAC address. If you are lost, check the instructions that accompanied your router. Check your devices to make sure you can get online.Īccess the router’s admin panel via a web interface (browser address bar) or by opening up dedicated firmware software. Make sure your Internet is connected properly, ensuring that the Ethernet cable is going from the modem to the router and that there is an available wireless connection for connected devices. Luckily, this is not an overly difficult task and certainly not as frustrating as, say, learning how to disable IPV6 on a router. Stay tuned with It’s FOSS for more Linux tutorial and tips.When you revert your router to its default settings, the MAC address will also reset to the original setting. You have successfully changed the MAC address in true Linux style. Now, verify new MAC address: ip link show enp0s31f6 Next, set the new MAC using command: sudo ip link set dev enp0s31f6 address XX:XX:XX:XX:XX:XXįinally, turn the network back on with this command: sudo ip link set dev enp0s31f6 up I would recommend using Macchanger but if you don’t want to use it, there is another way to change the MAC address in Linux.įirst, turn off the network card using command: sudo ip link set dev enp0s31f6 down Method 2: Changing Mac address using iproute2 You can always check the man page for more details. Once you reboot the system, the changes will be automatically lost, and the actual MAC address will be restored again. Where XX:XX:XX:XX:XX:XX is the new MAC id that you want to change.įinally, to revert the MAC address to its original hardware value, run the following command: macchanger -p enp0s31f6

To change the MAC address to a specific value, specify any custom MAC address using command: macchanger -mac=XX:XX:XX:XX:XX:XX You will now see that MAC has been spoofed. Now, to assign any random MAC address to this network card, use: sudo macchanger -r enp0s31f6Īfter changing the MAC id, verify it using command: ip addr How to Use Macchanger to change MAC addressĭo you remember your network interface name? You got it in the Step 1 earlier.

So, choose No (by pressing tab key) and hit Enter key to continue. Modify the value named NetworkAddress to reflect the desired MAC address, but without hyphens/colons, if you want 00-B3-A0-03-00-1F, set the value to 00B3A003001F. I recommend not to run it automatically, unless you really need to change your MAC address every time. Go through the numbered subkeys until you find one that matches your network adapter configuration.

Change network address on wireless network mac address